Loading... Please wait...

Learn the Stand

The Base
           

The EXECUTIVE BASE is the most common of the bases. It has our standard boomerang shape, 0.25 inch thick steel plate top base with quarter inch thick angle iron hand welded and shaped to perfection. This base is used for desks that have a desktop less than 1.75 inches thick. Thicker desks can be accommodated upon request. The lower clamping area also has a under reach of 1.75 inches. To use this base, you must have at least 1.75 inch clearance under your desk before the stand clamping unit hits an obstruction such as a privacy panel. More than 1.75 inches is not an issue. This base, like all of our products, can be modified to meet your specific needs.
 
              office-base-side-view.png

The OFFICE BASE is used where less under reach space is available. This is common to standard office Steel brand desks. We can modify this base to meet any under reach requirement, even flat or no under reach desks. It has our standard boomerang shape, 0.25 inch thick steel plate top base with quarter inch thick angle iron hand welded and shaped to perfection. This base is used for desks that have a desktop less than 1.75 inches thick. The lower clamping area also has a under reach of 1.00 inches. To use this base, you must have at least 1.00 inch clearance under your desk before the stand clamping unit hits an obstruction such as a privacy panel. More than 1.00 inches is not an issue. This base, like all of our products, can be modified to meet your specific needs.
The GROMMET BASE allows the end user to use the stand anywhere on the desk surface versus the edges only. This option will require drilling two 0.5 inch holes in the desktop (only one hole for single stands). A template will be provided for visual reference and placement prior to drilling. We can modify this base to meet any shape or requirement needed. It has our standard boomerang shape, 0.25 inch thick steel plate top base with two 0.75 long anchor dowels hand welded into the vertical poles to acquire the mechanical advantage needed for a solid base structure. This base can be used for any depth of desk top. This base, like all of our products, can be modified to meet your specific needs.
           
    The FREE STANDING BASE is slightly larger than the standard base profile but keeping with the attractive boomerang shape. It is also constructed of 0.25 inch steel plate as is all of our bases. This base can be used only in select configurations. We cannot offer this base while using any version of the fully articulating models due to the lack of mechanical advantage needed for safe use of the stand. This base is ideal for the person needing a great stand without the need to move the monitors frequently. You can use this with the fixed or pivot models with a limited number of monitors to mount. This base, like all of our products, can be modified to meet your specific needs.
           
The Vertical Poles
           
    The VERTICAL POLE is the component of the stand that allows the stands to tower to the required height. Fabricated from 1.25 inch round DOM carbon steel tubing, this component is strong enough to hold any size monitor at just about any height. The standard height for these are 18 inches for single tier stands and 30 inches for double tier stands. They are modular in design and can be stacked to acquire additional heights if expansion is needed in the future. This vertical pole, like all of our products, can be modified to meet your specific needs.
           
    The VERTICAL POLE EXTENSION allows extreme flexibility for growth in the vertical direction for our stands. These parts will allow you to stack any of our vertical poles to reach new and higher limits. Designed to be modular, it will insert and seat in your existing vertical poles on your existing stand to extend the vertical height. Need to expand and grow, don’t buy another stand, expand with these extension parts. Should you order a single tier stand and then decide to expand to a double or more tier stand, just order the extension pieces and extend the vertical height to the necessary requirements. This extension, like all of our products, can be modified to meet your specific needs.
           
The Center Horizontal Crossbar
           
    The CENTER HORIZONTAL CROSS BAR mounts to the vertical poles to allow horizontal positioning of the monitors. The monitors can be placed anywhere along the horizontal axis of the free space of the cross bar using the sliders. The cross bars are made from the highest teleSpar carbon steel tubing manufactured in the USA steel mills. We have chosen this steel to get the telescoping feature needed for the cross bar design function. The center cross bar comes in standard lengths of 24 and 30 inches but can be fabricated to your specific needs. Each cross bar and be extended in length using the extension pieces below. This cross bar, like all of our products, can be modified to meet your specific needs.
           
    The HORIZONTAL CROSS BAR EXTENSION offers you unlimited horizontal wingspan to spread your monitors out. It also can be fabricated to any angle to accommodate limited wingspan widths or special considerations with the standard being 30 degree for panoramic viewing of the monitors. As with the other parts of the stand, it is modular in design and can be added to any existing stand. The ends insert into the other cross bars and bolt in place using one bolt that has only one purpose; to secure the extension from sliding. All structural requirements are designed into the members. This base, like all of our products, can be modified to meet your specific needs.
           
The Slider
           
    The SLIDER component gives us the feature to horizontally position our monitors anywhere along the horizontal cross bar axis by simply “sliding” it into position. The construction is that of a slightly larger teleSpar tubing than the cross bar material. It is in itself, a critical part of the flexibility of the different stand configurations. The slider can be fitted for different mounts to mount different type, weight and size of monitors on the same stand. As with other parts of the stand, the slider is modular in design to offer mixing or matching of sliders. This is huge in the freedom to choose your monitors that you wish to use, EVEN if they are different models. No other stand will offer you this type of flexibility or this level of feature benefit. This slider, like all of our products, can be modified to meet your specific needs.
           
  Some standard points that need to be understood regardless of the mount selection are as follows;
Mounts are selected based on monitor weight and desired features, not size
Mounts DO NOT take away from the standard features of the stand itself
Vertical placement (provided by the vertical poles)
Horizontal placement (provided by the horizontal cross bars)
Slider placement (provided by the sliders)
Each mount presents different features for your required needs
Any model or type mount can be assembled to the stand, including TV mounts
           
The Base
           
    The FIXED - 40 LB MOUNT is the first of many mounting options you have for your stand. One size DOES NOT fit all with our stands. Physical monitor dimensions are not usually a concern. Each of the mounting types is selected based on monitor weight and desired features, not based on the size of the monitor. The fixed mount is the simplest and most affordable mount. This mount offers a flat mounting solution. This 40 lb mount will accept standard VESA monitors. Special adaptors can be machined to accept non-standard VESA mounts.
           
    The SINGLE PIVOT - 25 LB MOUNT is our first mounting option that will allow you to compliment the standard features of your stand. The single pivot will pivot top to bottom and rotate from portrait to landscape by simply positioning your monitor. This mount will be the minimum needed for more than one tier configuration for the top tier. It is easy and takes no tools once adjusted to take the gravity out of the weight of the monitor. This 25 lb mount will accept standard VESA monitors. Special adaptors can be machined to accept non-standard VESA mounts.
           
    The DOUBLE PIVOT - 25 LB MOUNT is similar to the single pivot with the addition of one pivot point; the side by side pivot. This mount will pivot top to bottom as well as side to side, and rotate from portrait to landscape by simply positioning your monitor. It is easy and takes no tools once adjusted to take the gravity out of the weight of the monitor. This 25 lb mount will accept standard VESA monitors. Special adaptors can be machined to accept non-standard VESA mounts.
           
    The HEAVY DUTY - HD PIVOT - 50 LB MOUNT is very versatile. This mount will pivot top to bottom as well as rotate side to side, and rotate from portrait to landscape by simply positioning your monitor. The main body of this mount is on a slider assemble that pivots in a machined slot and is secured into place by a screw adjustment. Rotation is possible by the pivot point of the base elbow. This mount can be used for heavy monitor or for mounting a TV to the stand. The main elbow is standard to the 20 lb and 50 lb articulating mounts that we offer. This 50 lb mount will accept standard VESA monitors. Special adaptors can be machined to accept non-standard VESA mounts.
           
    The ARTICULATING - 20 LB MOUNT is the first of the line of fully articulation mounts and is the most popular of the mounts. It is an incredible piece of equipment. It has a one section arm design that will allow placement of the monitor away from the main connection point. This mount is for monitors up to 20 lbs in weight. The 20 lb mount offers a “float” style positioning feature. Once the proper spring tension has been set to cancel the gravity of the monitor, just place the monitor where you want it and let it go. It will stay. Other features include vertical and horizontal adjustments, rotation from portrait to landscape mode, and forward articulation of the monitor independently from the other monitors. These features are added to the common features of the stand. By adding the features of the stand along with the articulating mount, you will have the most durable, flexible, and versatile stand built in the world today. This 20 lb mount will accept standard VESA monitors. Special adaptors can be machined to accept non-standard VESA mounts.
           
    The ARTICULATING - 30 LB MOUNT continues the articulating models of mounts. It has a two section arm design that will allow placement of the monitor away from the main connection point. This model has a lower section that is more vertically positioned to allow the added weight. The second section of the mount will allow the same features as the 20 lb version. This mount is for monitors up to 30 lbs in weight. The 30 lb mount also offers a “float” style positioning feature. Once the proper spring tension has been set to cancel the gravity of the monitor, just place the monitor where you want it and let it go. It will stay. Features include vertical and horizontal adjustments, rotation from portrait to landscape mode, and forward articulation of the monitor independently from the other monitors. This 30 lb mount will accept standard VESA monitors. Special adaptors can be machined to accept non-standard VESA mounts.
           
    The ARTICULATING - 50 LB MOUNT is the last of the articulating models. It will hold any monitor up to 50 lbs. It has a one section arm design that will allow placement of the monitor away from the main connection point. It consist of one section arm and the same mounting head as the 50 lb pivot mount. Features include horizontal adjustments, rotation from portrait to landscape mode, and forward articulation of the monitor independently from the other monitors. This 50 lb mount will accept standard VESA monitors. Special adaptors can be machined to accept non-standard VESA mounts.
           


Sign up to our newsletter